Publishing
- Publications Catalogue
- Call for authors
- New Titles
- 50 Years of Polymer Testing
- A Guide to Successful Rapid Manufacturing
- A Practical Guide to Energy Management for Managers
- A Practical Guide to Energy Management for Processors
- A Practical Guide to Energy Management of Facilities and Utilities
- Acetal Copolymers
- Acrylonitrile-Butadiene-Styrene
- AddCom 2012 - First for Additives and Compounding
- Addcon 2008 Conference Proceedings
- Addcon 2009
- Additive Migration from Plastics into Foods
- Adhesion and Bonding to Polyolefins
- Adhesion to Fluoropolymers
- Adhesives and Sealants
- Adhesives and Sealants
- Adhesives and Sealants for Aerospace Applications
- Adhesives and Sealants for Electronic Applications
- Adhesives and Sealants for Engineering Applications
- Advances in Automation for Plastics Injection Moulding
- Advances in Biodegradable Polymers
- Advances in Blow Moulding Process Optimization
- Advances in Nanofibre Research
- Advances in Nanofibre Research, Volume 2
- Advances in Nanofibre Research, Volume 3
- Advances in Polymer Coated Textiles
- Advances in Thermoforming
- Advances in Urethane Science and Technology
- Aerospace Applications
- Ageing of Rubber & Accelerated Heat Ageing Test Results
- Ageing of Rubber & Accelerated Weathering and Ozone Test Results
- Agricultural and Horticultural Applications of Plastics
- Air Monitoring in the Rubber and Plastics Industries
- Air Pollution
- An Introduction to Conductive Polymer Composites
- An Introduction to Rubber Technology
- Analysis of Plastics
- Analysis of Thermoset Materials, Precursors and Products
- Anti-Corrosion Polymers: PEEK, PEKK and Other Polyaryls
- Antimicrobials and Biocides
- Antistatic Agents
- Application of Textiles in Rubber (The)
- Applied Polymer Composites
- Approaches to Automation
- Approaches to Automation II
- ARBURG Practical Guide to Injection Moulding
- Art of Plastics Design 2005
- Asbestos Substitutes
- ASC 2009 Pressure Sensitive Adhesives
- ASC 2009 Spring Convention & Expo
- ASC 2009 Waterborne Adhesives
- Assessing Food Safety of Polymer Packaging
- Automotive Adhesives, Sealants and Coatings 2008
- Automotive Applications of Nylon/Polyamide
- Automotive Applications of Polymers II
- Automotive Applications of Polyurethane Elastomers
- Automotive Supplier 98
- Automotive Supplier 99
- Barrier Packaging in Food Applications
- Basic Introduction to Separation Science (A)
- Biocides in Plastics
- Biocides in Plastics - From Preservation to Hygiene Control, 2008
- Biocides in Synthetic Materials 2010
- Biocomposites
- Biodamage and Biodegradation of Polymeric Materials
- Biodegradable Plastics
- Biodegradable Polymers
- Biodegradable Polymers
- Biodegradable Polymers for Medical Applications
- Bioplastics World
- Biopolymers
- Biotechnology in Biopolymers
- Blends and Alloys of Engineering Thermoplastics
- Blends with ABS
- Blends with EPDM
- Blends with PMMA
- Blends with Polyethylene
- Blister Packaging
- Blowing Agent Systems: Formulations and Processing
- Blowing Agents
- Blowing Agents '99
- Blowing Agents and Foaming Processes 2002
- Blowing Agents and Foaming Processes 2003
- Blowing Agents and Foaming Processes 2005
- Blowing Agents and Foaming Processes 2008
- Blowing Agents and Foaming Processes 2009
- Blowing Agents and Foaming Processes 2010
- Blowing Agents and Foaming Processes 2011
- Blowing Agents and Foaming Processes 2012
- Blowing Agents for Polymeric Foam
- Blowing Agents for Polyurethane Foams
- Bonding Elastomers: A Review of Adhesives and Processes
- Bonding of Wood
- Budgeting, Costing and Estimating for the Injection Moulding Industry
- Building and Civil Engineering Applications
- Cable Applications of Thermoplastic Elastomers
- Car Bumpers
- Carbon Nanotube Based Composites
- Cast Polyurethane Elastomers
- Catalysts used in the Polyurethane Industry
- Cellular Polymers
- Cellular Polymers II
- Cellular Polymers III
- Cellular Polymers IV
- CFC-Free Blowing Agents for Polyurethane
- Characterisation of Copolymers
- Characterisation of Polymers, Two Volume Set
- Characterisation of Polymers, Volume 1
- Characterisation of Polymers, Volume 2
- Characteristics and Analysis of Non-Flammable Polymers
- Chemical Analysis of Polymers
- Chemical Resistance Data Sheets, Volume One: Plastics
- Chemical Resistance Data Sheets, Volume Two: Rubbers
- Chemicals Management After REACH
- Chemistry and Technology of Polyols for Polyurethanes
- China
- Chlorosulphonated Polyethylene
- Chromatography Mass Spectroscopy in Polymer Analysis
- Chromogenic Polymers
- Clay-Containing Polymeric Nanocomposites, Two Volume Set
- Clean Rooms for Profit
- Coatings and Inks for Food Contact Materials
- Coextrusion
- Commodity Plastics - As Engineering Materials?
- Composites - Tooling and Component Processing
- Composites and Plastics in Construction
- Composites for Automotive Applications
- Composites in Renewable Energy Generation
- Composites in the Railway Industry
- Compounding in Co-rotating Twin-screw Extruders
- Compressive Behaviour of Composites
- Computer Integrated Manufacturing and Computer Aided Manufacturing (CID/CAM) for the Polymer Industries
- Computer Modelling of Polymer Processing
- Conductive Polymers
- Construction Applications of Polyurethanes
- Continuous Vulcanisation
- Continuous Vulcanisation of Elastomer Profiles
- Coupling Agents
- Cure Monitoring for Composites and Adhesives
- Curing Agents for Rubber
- Decorating, Printing and Embossing Plastics
- Degradation and Stabilisation of Aromatic Polyesters
- Degradation and Stabilisation of Aromatic Polyesters
- Degradation and Stabilisation of Polyamides
- Design of Extrusion Forming Tools
- Designing with Plastics
- Determination of Additives in Polymers and Rubbers
- Developments in Colorants for Plastics
- Developments in Polyacetylene
- Developments in the Theory of Cationoid Polymerisations
- Developments in Thermoplastic Elastomers
- Disposal of Polyurethanes
- Doing Plastics Business in Poland 2005
- Easy Identification of Plastics and Rubbers
- Elastomeric Foam
- Elastomers in Oil Recovery
- Electrical Applications of Polyurethanes
- Electrical Cables
- Electromagnetic Interference Shielding Polymers
- Electron Beam Irradiation
- Electronics Applications of Polymers II
- Electrospinning (Review Report)
- Electrospinning and Nanofibres
- Electrospinning for Advanced Biomedical Applications and Therapies
- Electrospun Nanofibres and Their Applications
- Emerging Applications for Elastomers to 2017
- EMI Shielding
- Emissions from Plastics
- Emissions from Processing Thermoplastics
- Emulsion Polymerisation and Latex Applications
- End-of-Life Tyres
- Endocrine Disruptors 2011
- Endocrine Disruptors 2012
- Engineering and High Performance Plastics
- Engineering and Structural Adhesives
- Engineering Elastomers 2003
- Enhancing Polymers using Additives and Modifiers I
- Enhancing Polymers using Additives and Modifiers II
- Environmental Issues
- Environmental Stress Cracking (Crazing)
- Environmental Stress Cracking of Plastics
- EPDM 2000: Supply and demand into the next decade
- Epoxy Composites: Impact Resistance and Flame Retardancy
- Epoxy Resins in Aerospace Applications
- EU Regulation of Chemicals REACH
- Extractables & Leachables for Pharmaceutical Products 2010
- Extractables and Leachables Europe 2012
- Extractables and Leachables for Pharmaceutical Products 2011
- Extruder Dies
- Extrusion Blow Moulding
- Extrusion of PVC (Processes and Equipment)
- Failure of Plastics and Rubber Products
- Failure of Polymer Products Due to Chemical Attack
- Failure of Polymer Products Due to Photo-Oxidation
- Failure of Polymer Products Due to Thermo-Oxidation
- Fast Mouldmaking/Rapid Tooling
- Filament Winding for Composites
- Fire and Toxicity
- Fire Toxicity of Plastics
- Fire: Additives and Materials
- Fixing and Fastening: Joining of Plastics 99
- Flame Retardant Polymeric Foams (excl. Polyurethane)
- Flame Retardant Polyurethane Foams
- Flame Retardants
- Flame Retardants
- Flame Retardants for Plastics
- Flash Removal (Machinery, Methods, Automation, etc.)
- Flexible Packaging
- Flexible Polyurethane Foams
- Fluorine in Agriculture
- Fluorine in Medicine in the 21st Century
- Fluoroplastics
- Fluoropolymers - Technology, Markets and Trends
- Food Contact Materials - Rubbers, Silicones, Coatings and Inks
- Food Contact Polymeric Materials
- Food Contact Polymers 2007
- Food Contact Polymers 2009
- Food Contact Rubbers 2 - Products, Migration and Regulation
- Food Industry and Packaging Materials - Performance-oriented Guidelines for Users
- Food Packaging and Food Alterations: The User-oriented Approach
- Food Packaging and Food-Contact Applications
- Food Packaging Legislation
- Framework for Chemical Risk Management under REACH
- Fuel Cells
- Functional Additives for the Plastics Industry
- Gas Assisted Moulding
- Gas Injection Moulding
- Geosynthetics
- Granulators (Machinery)
- Graphite Fibre Reinforced Epoxy Composites
- Handbook of Biodegradable Polymers
- Handbook of Composite Fabrication
- Handbook of Plastic Films
- Handbook of Plastics Recycling
- Handbook of Polymer Blends and Composites, Volume 1
- Handbook of Polymer Blends and Composites, Volume 2
- Handbook of Polymer Blends and Composites, Volume 4
- Handbook of Polymer Foams
- Handbook of Polymer Testing - Short-Term Mechanical Tests
- Handbook of Polymers in Electronics
- Handbook of Polymers in Paper Conservation
- Handbook of Rubber Bonding
- Handbook of Thermoset Resins
- Hazards in the European Rubber Industry Conference
- Health and Safety in the Rubber Industry
- Health and Safety Issues Relating to Isocyanates
- High Performance and Speciality Elastomers 2007
- High Performance Elastomers
- High Performance Elastomers & Polymers for Oil & Gas Applications 2012
- High Performance Elastomers and Polymers for Oil and Gas 2010
- High Performance Engineering Plastics
- High Performance Fillers 2005
- High Performance Fillers 2007
- High Performance Fillers for Polymer Composites 2009
- High Performance Plastics 2005
- High Performance Plastics 2011
- High Performance Plastics Business Bulletin
- High Performance Polymer Fibres
- High Performance Thermoplastics and Composites for Oil and Gas Applications 2011
- Hoses for Automotive Applications
- Hoses for High Performance Environments
- Hot Runners in Injection Moulds
- HPE 2002
- Hybrid Composites
- Impact Modifiers
- In-Mould Decoration of Plastics
- Infrared and Raman Spectroscopy of Polymers
- Injection Moulding 2002
- Injection Moulding: Advanced Technology for Optimisation of Operational Performance
- Innovations in Rubber
- Innovative Graphene Technologies: Developments & Characterisation, Volume 1
- Innovative Graphene Technologies: Evaluation and Applications, Volume 2
- Interaction of Polymers with Polluted Atmospheres
- International Polymer Science and Technology
- International Rubber Exhibition and Conference (IREC 99)
- Introduction to Automotive Composites (An)
- Introduction to Plastics Recycling, 2nd Edition
- Introduction to Polymer Analysis
- Ion Exchange Resins
- ITEC Asia 2001
- Joining of Plastics
- Joining Plastics 2006
- Latex
- Latex 2001
- Latex Allergies
- Latex and Synthetic Polymer Dispersions 2008
- Latex and Synthetic Polymer Dispersions 2010
- Latex and Synthetic Polymer Dispersions 2012
- Leachables & Extractables for Pharmaceutical Products 2009
- Leachables and Extractables 2008
- Leachables, Extractables and Migration
- Legislation on Emissions
- Legislation on Plastics Waste
- Life Cycle Assessment and Environmental Impact of Polymeric Products
- Light Emitting Polymers
- Light Vehicle Tyres
- Lightweight Thermoset Composites
- Lipid Nanocarriers in Cancer Diagnosis and Therapy
- Liquid Crystal Polymers in Electronic Applications
- Liquid Silicone Elastomers
- Long Fibre Reinforced Thermoplastics
- Long-term and Accelerated Ageing Tests on Rubbers
- Looking Good - Better Business Results Through Colour and Print
- Low Environmental Impact Polymers
- Machining of Reinforced Plastics
- Managing SVHCs under REACH 2010 / Understanding & Implementing CLP 2010
- Manufacturers of Injection Moulding Machinery
- Market Data for Acrylonitrile Butadiene Styrene (ABS)
- Market Data for Composites
- Market Data for Polyamides
- Market Data for Polyethylene Terephthalate (PETP)
- Market Data for Thermoplastic Elastomers
- Market Data for Use of Polymers in Automotive Applications
- Market Data on Polypropylene
- Market Data on PVC
- Market Data on Scrap Tyres
- Market Data on Tyres (Non-scrap)
- Mechanical Properties of Adhesive Joints
- Medical and Surgical Applications of Polyurethanes
- Medical Applications of Thermoplastic Elastomers
- Medical Devices
- Metallic Pigments in Polymers
- Metallocene Catalysts and Polymers
- Metallocene Technology Seminar
- Metallocene-Catalysed Polymerisation
- Microcellular Polymers
- Microwave Vulcanisation
- Mineral Fillers
- Miscibility of PVC Blends
- Mixing in Single Screw Extrusion
- Mixing of Rubber
- Mixing of Vulcanisable Rubbers and Thermoplastic Elastomers
- Mould Cooling
- Mould Design and Mould Making
- Mould Design Guide (The)
- Mould Fouling and Mould Cleaning
- Mould Release Agents for Plastics and Rubber
- Mould Sticking, Fouling and Cleaning
- Mouldable Particle Foams
- Moulding of Propylene Polymers
- Multi-Material Injection Moulding
- Multilayer Films 2005
- Nanocomposites
- Nanocomposites
- Nanopolymers 2007
- Nanopolymers 2008
- Nanopolymers 2011
- Nanotubes
- Natural Ageing of Rubber
- Natural and Synthetic Latex Polymers
- Natural and Wood Fibre Reinforcement in Polymers
- New Opportunities for Thermoplastic Elastomers 2000
- New Opportunities for Thermoplastic Elastomers 96
- New Opportunities for Thermoplastic Elastomers 98
- Nitrosamines in Rubber
- Nitrosamines in the Rubber Industry
- Non-destructive Testing
- Non-tyre Rubber Components in the Automotive Industry
- Novel and Traditional Fillers for Plastics
- Nucleating Agents
- O-rings (Properties, Testing, Design, Materials, etc.)
- Oilfield Engineering with Polymers 2001: Exploring the Limits of Materials Technology
- Oilfield Engineering with Polymers 2003
- Oilfield Engineering with Polymers 2006
- Optical Fibres
- Ozonation of Organic and Polymer Compounds
- Particulate Fillers for Polymers
- Particulate-Filled Polymer Composites, Second Edition
- PEEK and other Polyaryletherketones
- Pharmaceutical Applications
- Pharmaceutical Applications of Polymers for Drug Delivery
- Pharmaceutical Polymers 2007
- Phenolic Foam
- Photoinitiated Polymerisation: Theory and Applications
- Physical Testing of Plastics
- Physical Testing of Thermoplastics
- Piezoelectric Properties of Polymers
- Pigments in Plastics
- Plastic Films - Situation and Outlook
- Plastic Flame Retardants: Technology and Current Developments
- Plastic Lenses
- Plastic Pipes and Fittings for Drinking Water
- Plastic Products Recycling: Technology and Market Trends
- Plasticisers
- Plasticisers
- Plasticisers: Selection, Applications and Implications
- Plastics Additives
- Plastics and the Environment
- Plastics and the Environment (Review Report)
- Plastics and the Market for Small Domestic Appliances
- Plastics Compendium, Volume 1 (The)
- Plastics Compendium, Volume 2 (The)
- Plastics in European Cars, 2000-2008
- Plastics in Italy: Facts and Figures
- Plastics in Packaging
- Plastics in Pressure Pipes
- Plastics in Thermal and Acoustic Building Insulation
- Plastics Materials for Packaging
- Plastics Packaging Recycling
- Plastics Profile Extrusion
- Plastics Reborn in 21st Century Vehicles
- Plastics Waste
- Plastics, Rubber and Health
- Polyamides as Engineering Thermoplastic Materials
- Polyaniline
- Polybenzoxazines: Chemistry and Properties
- Polyester Polyols
- Polyethylene Terephthalate Bottles
- Polyimides: Materials, Processing and Applications
- Polymer Blends
- Polymer Bonding 2004
- Polymer Concrete
- Polymer Electronics - A Flexible Technology
- Polymer Enhancement of Technical Textiles
- Polymer Foams - Trends in Use and Technology
- Polymer Lexicon (The)
- Polymer Membranes: Materials, Structures and Separation Performance
- Polymer Processing with Supercritical Fluids
- Polymer Product Failure
- Polymer Reference Book
- Polymer Research, 2007
- Polymer Rheology 2001
- Polymer Rheology 99
- Polymer Supported Chemical Reactions
- Polymer Testing 96
- Polymer Yearbook 18
- Polymer/Layered Silicate Nanocomposites
- Polymeric Materials from Renewable Resources
- Polymeric Materials in Aggressive Environments
- Polymeric Membranes
- Polymeric Precursors for Ceramic Materials
- Polymeric Seals and Sealing Technology
- Polymers and Polymer Composites
- Polymers and the REACH Legislation
- Polymers for Controlled Release Systems
- Polymers for the Medical Industry 2001
- Polymers for the Medical Industry 99
- Polymers for Wire and Cable - Changes within an Industry
- Polymers from Renewable Resources
- Polymers in Aerospace Applications
- Polymers in Aggressive and Corrosive Environments (PACE), 2004
- Polymers in Agriculture and Horticulture
- Polymers in Asphalt
- Polymers in Automotive Fuel Containment 2005
- Polymers in Building and Construction
- Polymers in Building and Construction
- Polymers in Cementitious Materials
- Polymers in Construction
- Polymers in Defence and Aerospace Applications 2010
- Polymers in Dental Applications
- Polymers in Disposable Medical Devices: A European Perspective
- Polymers in Electronics
- Polymers in Electronics 2007
- Polymers in Fuel Cells
- Polymers in Mass Transit
- Polymers in Medical Applications
- Polymers in Sport and Leisure
- Polymers in Telecommunication Devices
- Polymers in Vehicles (Non-Tyre)
- Polymers: An Emerging Force in Mass Transit
- Polyolefin Foams
- Polyolefins Business Bulletin
- Polyphenylene Sulphide (PPS)
- Polypropylene in Packaging
- Polysaccharides in Medicinal and Pharmaceutical Applications
- Polystyrene
- Polyurethane Adhesives
- Polyurethane Adhesives, Coatings and Binders
- Polyurethane Foams
- Polyurethane Foams used in Automotive Applications
- Polyurethane Insulation
- Polyurethanes (excluding Foams, Adhesives, Coatings and Binders)
- Polyurethanes used in Footwear
- Polyurethanes used in Furniture
- Polyurethanes used in Packaging
- Polyurethanes used in Sport and Recreational Applications
- Polyvinyl Alcohol: Materials, Processing and Applications
- Practical Guide to Adhesive Bonding of Small Engineering Plastic and Rubber Parts
- Practical Guide to Blow Moulding
- Practical Guide to Chemical Safety Testing
- Practical Guide to Flexible Polyurethane Foams
- Practical Guide to Green Technology for Ground Engineering
- Practical Guide to High Performance Engineering Plastics
- Practical Guide to Hydrogenated Nitrile Butadiene Rubber Technology
- Practical Guide to Latex Technology
- Practical Guide to Microbial Polyhydroxyalkanoates
- Practical Guide to Polyethylene
- Practical Guide to Polyimides
- Practical Guide to Polypropylene
- Practical Guide to Polyvinyl Chloride
- Practical Guide to Rotational Moulding
- Practical Guide to Rotational Moulding, 2nd Edition
- Practical Guide to Rubber Injection Moulding
- Practical Guide to Smoke and Combustion Products from Burning Polymers
- Practical Guide to Structures, Properties and Applications of Styrenic Polymers
- Practical Guide to Studying Dendrimers
- Practical Guide to the Assessment of the Useful Life of Plastics
- Practical Guide to the Assessment of the Useful Life of Rubbers
- Pressure Sensitive Acrylics
- Pressure Sensitive Adhesive Tapes
- Processing Metallocene Polyolefins
- Progress in Rubber, Plastics and Recycling Technology
- Properties and Applications of Elastomeric Polysulfides
- Properties of Polyurethane Coatings
- Pumps
- PVC - World Markets and Prospects
- PVC and the Environment
- PVC Compounds and Processing
- PVC in Medical Applications
- PVC Plastisols
- PVC: Compounds, Processing and Applications
- Radiation Curing
- Rapid Prototyping
- Rapid Prototyping, Tooling and Manufacturing
- Rapid Tooling 2001
- Rapid Tooling 2002
- Rapra Collection of DSC Thermograms of Semi-Crystalline Thermoplastic Materials (The)
- Rapra Collection of Infrared Spectra of Rubbers, Plastics and Thermoplastic Elastomers, Third Edition (The)
- Rapra Guide to EC Directives and Proposals on Food Contact Polymers, Third Edition
- REACH 2007
- REACH EUROPE 2008
- REACH EUROPE 2009
- REACH for the Polymer Industry - A Practical Guide
- REACH USA 2008
- REACH USA 2009
- REACH USA 2010
- REACH USA 2011
- Reaction Injection Moulding of Polyurethane
- Real Benefits from Quality
- Recycling of Plastics
- Recycling of Plastics (Packaging)
- Recycling of Polyethylene
- Recycling of Polypropylene
- Recycling of Polyurethanes
- Recycling of Polyurethanes
- Recycling of Rubber
- Recycling of Rubbers
- Recycling Scrap Tyres
- Regulation of Food Packaging in Europe and the USA
- Reinforced Reaction Injection Moulding of Polyurethane
- Reinforced Thermoplastics: Composition, Processing and Applications
- Repairing of Composites
- Resin Transfer Moulding (Resin Injection Moulding)
- Review Articles
- Rheology and its Role in Plastics Processing
- Rheology: A Practical Approach to Quality Control
- Rigid Plastics Packaging-
- Ring Opening Polymerisation
- Role of Poly(Vinyl Chloride) in Healthcare (The)
- Rosin-based Chemicals and Polymers
- Rotational Moulding (Processes and Equipment)
- Rubber - A Story of Glory and Greed
- Rubber Analysis
- Rubber Basics
- Rubber Bonding 1998
- Rubber Business Bulletin
- Rubber Compounding Ingredients: Need, Theory and Innovation, Part I: Vulcanising Systems, Anti-Degradants and Particulate Fillers for General Purpose Rubbers
- Rubber Compounding Ingredients: Need, Theory and Innovation, Part II: Processing, Bonding, Fire Retardants
- Rubber Curing Systems
- Rubber Extrusion: Theory and Development
- Rubber Fume
- Rubber in the Environmental Age - Progress in Recycling
- Rubber Injection Moulding 2000
- Rubber Injection Moulding: A Practical Guide
- Rubber Mixing
- Rubber Mixing
- Rubber Pocket Book
- Rubber Product Failure
- Rubber Technologist's Handbook, Volume 1
- Rubber Technologist's Handbook, Volume 2
- Rubber to Metal Bonding
- Rubber to Metal Bonding
- Rubber to Metal Bonding
- Rubber-Modified Thermoplastics
- RubberChem 2001
- RubberChem 2002
- RubberChem 2004
- RubberChem 2006
- RubberChem 2008
- RubberChem 2010
- Rubbers in Contact with Food
- RubberTech China 98
- Science and Practice of Rubber Mixing (The)
- Screws for Polymer Processing - The Way to Better Productivity
- Screws for Polymer Processing II
- Shape Memory Polymers
- Sheet Moulding Compounds
- Shrink Packaging
- Silicone Elastomers
- Silicone Elastomers
- Silicone Elastomers 2006
- Silicone Elastomers 2008
- Silicone Elastomers 2009
- Silicone Elastomers 2011
- Silicone Elastomers 2012
- Silicone Products for Food Contact Applications
- Slipping - Towards Safer Flooring
- Smart Polymer Systems 2010
- Solar Cells
- Solid-State NMR of Polymers
- Solvent-Free Adhesives
- Sorting of Waste Plastics for Recycling
- Speciality Rubbers
- Spectroscopy of Rubbers and Rubbery Materials
- SPIRO Polymers
- Sports Equipment
- Sports Surfacing
- Stabilisers for Plastics
- Stabilisers for Polyolefins
- Starch-Based Degradable Polymers
- Statistical Process Control (SPC) for the Polymer Industries
- Sterilisation of Polymer Healthcare Products
- Stimuli Responsive Drug Delivery Systems
- Strain Rate Testing
- Structural Foam Moulding
- Structural Polyurethane Foams
- Structural Reaction Injection Moulding
- Structural Studies of Polymers by Solution NMR
- Structure and Properties of Crosslinked Polymers
- Styrenic Copolymers
- Surface Engineering of Polymeric Biomaterials
- Tackifiers
- Tamper Evident Packaging
- Tank Linings for Chemical Process Industries
- Testing of Polyurethane Elastomers
- Textile Applications of Polyurethanes
- The European Plastic Pipes Market
- The Future of Bioplastics to 2017
- The Future of Fibre-Reinforced Thermoplastics in Europe: Market Forecasts to 2018
- The Future of Green Tires to 2017
- The Future of High Performance Pigments to 2017
- The Future of Specialty Plastics to 2017
- Thermal Analysis of Polymers
- Thermal Analysis of Rubbers and Rubbery Materials
- Thermal Degradation of Polymeric Materials
- Thermal Methods of Polymer Analysis
- Thermal Stability of Polymers
- Thermo-oxidative Degradation of Polymers
- Thermochromic Phenomena in Polymers
- Thermoforming
- Thermoplastic Elastomers
- Thermoplastic Elastomers
- Thermoplastic Elastomers I: Threat or Opportunity?
- Thermoplastic Elastomers II - Processing for Performance
- Thermoplastic Elastomers III
- Thermoplastic Elastomers in Automotive Applications
- Thermoplastic Elastomers: Properties and Applications
- Thermoplastic Polyurethane Markets in the EU
- Thermoplastics and Thermoplastic Composites in the Automotive Industry 1997/2000
- Thermoset Nanocomposites for Engineering Applications,
- Thermoset Resins
- Thin Wall Injection Moulding
- Toxicity and Safe Handling of Di-isocyanates and Ancillary Chemicals, Second Edition
- Toxicity and Safe Handling of Rubber Chemicals, Fourth Edition
- Toxicity Issues in the Polyurethane Industry
- Toxicity of Curing Agents and Accelerators
- Toxicity of Flame Retardants, Stabilisers, and Antioxidants
- Toxicity of Plasticisers
- Toxicity of Plastics and Rubber in Fire
- Toxicity of Reinforcing Agents and Fillers (excl. Asbestos)
- Toxicity of Solvents
- Toxicology of Solvents
- TPE 2001
- TPE 2002
- TPE 2003
- TPE 2004
- TPE 2005
- TPE 2006
- TPE 2007
- TPE 2008
- TPE 2009
- TPE 2010
- TPE 2011
- TPE 2012
- Troubleshooting Injection Moulding
- Twin Screw Extruders
- Tyre Compounding for Improved Performance
- Tyre Recycling
- Tyres
- TyreTech 2000
- Tyretech 91
- Tyretech 92
- Tyretech 93
- Tyretech 94
- Tyretech 95
- TyreTech 98
- TyreTech 99
- Tyretech Asia 96
- Ultra High Molecular Weight Polyethylene
- Ultrasonic Welding of Polymers
- Under-the-Bonnet Applications
- Underlying Foundation of Science used in Regulation of Industrial Chemicals
- Update on Carbon Fibre
- Update on Chitosan: A Non-Viral Gene Delivery Vector
- Update on Engineering and Structural Adhesives
- Update on Gold Nanoparticles: From Cathedral Windows to Nanomedicine
- Update on Health and Safety in the Rubber Industries
- Update on Life Cycle Strategy for New Implants and Medical Devices
- Update on Medical Plasticised PVC
- Update on Mouldable Particle Foam Technology
- Update on Nanofillers in Nanocomposites: From Introduction to Application
- Update on Paramagnetic Sensors for Polymers and Composites Research
- Update on Polylactide Based Materials
- Update on Polymer Based Nanomedicine
- Update on Polymers for Ocular Drug Delivery
- Update on Polymers for Oral Drug Delivery
- Update on Polymers for Pulmonary Drug Delivery
- Update on Production of Recombinant Therapeutic Protein: Transient Gene Expression
- Update on REACH and GHS - The Asian Outlook
- Update on Silica-based Mesoporous Materials for Biomedical Applications
- Update on Syntactic Foams
- Update on the Technology and Applications of Polyaryletherketones
- Update on Troubleshooting in Thermoforming
- Update on Troubleshooting the PVC Extrusion Process
- Update on Undertaking Extractable and Leachable Testing
- uPVC (Rigid PVC)
- Urea Formaldehyde in Building Materials
- Use of the Rapra Vibrating Needle Curemeter in Monitoring the Cure of Polyurethane Foams (The)
- Utech 2000
- Utech 94
- Utech 94 - Processing Workshops
- Utech 96 - Processing Workshops
- Utech Asia 93
- Utech Asia 97
- Utech Asia 99
- UV Curable Adhesives
- V-Belts
- Vacuum Bag Moulding
- Versatility of Extrusion (The)
- Volatile Organic Compound (VOC) Emissions
- Volume Polymers in North America and Western Europe
- Water Vapour Permeability of Polymers
- Weathering of Polymers
- Wood Plastics Composites in Europe (2006)
- Wood Plastics Composites in Europe (2006) - Executive Summary Version
^ Back to Top
Conferences
^ Back to Top
Courses
^ Back to Top
Seminars
^ Back to Top
News & Events
- Smithers Rapra launches first issue of Applied Polymer Composites
- Expert Webinar: How to Avoid Failure of Rubber Products
- Starlim, ContiTech, Cabot and More Headline the Silicone Elastomers World Summit 2013
- Smithers Rapra to host free webinar on Progress in Biobased Material Development
- Extractables and Leachables Conference USA 2013
- Smithers Rapra announces the 1st Edition of The Future of Tire Technology
- Green tires offer high-growth opportunities for suppliers
- The European Forum for Industrial Biotech and the biobased economy is evolving
- Smithers Rapra to reveal the future of plastics at pdm 2013
- Industry Leaders to Gather at High Performance Polymers for Oil & Gas 2013
- Smithers Rapra’s 8th Annual Biopolymers Symposium returns to Chicago
- Extractable and Leachables USA 2013: Call for Papers
- Global elastomers market forecast to reach 33.3 million tonnes by 2017
- Smithers Rapra’s Carbon Black World brings hundreds of carbon black leaders to San Diego next week
- Momentive, Dow Corning, & Shin-Etsu at Silicone Elastomers Americas 2012
- Polymer Coated Textiles are Topic of Smithers Rapra's New Book
- Nike, Ford, Goodyear headline Smithers Rapra’s Biopolymers Symposium in San Antonio, TX
- Expert Webinar, 1 August: Recycling and Use of Waste Rubber
- Call for Papers - Applied Polymer Composites
- AddCom 2012 - Exclusive speaker interview
- New Smithers Rapra Webinar Demystifies Adhesives
- Completely Revised Edition of Practical Guide to Rotational Moulding is Published
- Smithers Rapra Expert Speaks Live on Avoiding Plastic Failure
- Smithers Rapra Selected As National Tire Reference Laboratory
- Smithers Rapra’s Silicone Elastomers Americas 2012 heads to Ohio
- Smithers Rapra Expanding offerings
- New Venue Announced for iSmithers Latex & Synthetic Polymer Dispersions Conference
- Latex conference - discounted places have sold out
- Latex conference - only a very limited number of places now available at the local discounted rate
- Read an exclusive interview with Peter Warren, James Walker & Co Ltd, UK who is presenting the opening paper at High Performance Elastomers & Polymers for Oil & Gas Applications
- Endocrine Disruptors - exclusive interviews with speakers now available to download
- Important Announcement regarding Extractables and Leachables Events
- High Performance Elastomers & Polymers for Oil & Gas Applications 2012
- Endocrine Disruptors - venue change
- Authoritative New Book on Lipid Nanocarriers Science, Relevant to Cancer Therapy, is First in its Field
- Smithers Rapra Europe Names Principal Consultant for the Medical & Pharmaceutical Sector
- PVC Processing Technology is the Focus of iSmithers' New Book
- New and Specific Aspects of Polysaccharides are Examined in iSmithers’ Latest Book
- New Book Reviews Techniques Used to Perform a Controlled Extraction Study for Leachables and Extractables
- New Book Gives a Fresh Point of View on the Structure and Properties of Crosslinked Polymers
- Assessment of Fire Hazards from Combustion Products are the Focus of New Book
- The Remarkable Features of Nanofibres are Presented in a New Book
- Conductive Polymers to be Addressed at International Conference
- Polymer Library Ramps up Open Access Content
- New Book Explores Powerful Technique for the Analysis of Polymers
- A Distinctive Look at How to Maximize Profitability Through Environmental Compliance
- iSmithers' TPE conference highlights how the demand for higher performance TPEs is set to drive technical product developments
- iPolyCond Project Conducts Industrial Survey to Benchmark Knowledge and Awareness of Novel Conductive Polymers
- "Polymer REACH" Project Benchmarks Awareness of REACH Legislation Across European Polymer Industry
- Silicone Elastomers: The Material of Choice?
- iSmithers’ first Endocrine Disruptors conference comes to Zurich
- New Book Delivers Practical Guidance on Adhesive Bonding
- iSmithers Invites Papers for High Performance Plastics Conference
- Conference to address the use and regulation of biocides in synthetic materials
- First Issue of 'Polymers from Renewable Resources' Now Available for Preview
- REACH for Polymers – Providing a Toolkit to help with the REACH regulation
- EU funded project to address energy anxieties in the plastics processing industry
- Extractables & Leachables for Pharmaceutical Products conference to drive safe use of polymers in medical applications
- Expert Information is Published on the Latest Adhesive and Sealant Trends and Innovations
- Thirteenth TPE Confernece Returns to Cologne During K Week
- New State-of-the-Art Review Determines Key Aspects of PAEK Technology
- iSmithers recruits speakers for third international Extractables & Leachables for Pharmaceutical Products conference
- Improve Your Plastics Processing with a New In-Depth Review
- Dow Chemical Company Corporate Director of Product Responsibility Joins US REACH Conference
- High Performance Elastomers & Polymers Conference to support the Oil and Gas Industries
- Smithers Rapra announces a 2 day Industry briefing seminar "Rubber within Reach"
- Invaluable Reference Brings Together a Wealth of Data on Food Contact Materials
- FIFTEETH ANNUAL CONFERENCE FOR PLASTICS ADDITIVES AND COMPOUNDING TO FOCUS ON EFFICIENCY AND COST SAVINGS
- Crucial New Book Explores use of PVC in Medical Products
- US Food and Drug Administration (FDA) joins Leachables & Extractables for Pharmaceutical Products Conference this May
- GETTING THROUGH TOUGH TIMES IS FOCUS AT FIFTH REACH CONFERENCE IN AMSTERDAM
- Fourth High Performance Fillers for Polymer Composites conference found to be invaluable during these difficult economic times
- European project to address energy anxieties in polymer industry
- Understanding Polyurethanes - Training Seminar
- iSmithers, invites people to join the 12th prestigious TPE 2009 speaking panel this November
- Prestigious Leachables & Extractables Speaking Panel announced for Pharmaceutical Conference in Barcelona
- iSmithers Announces Prestigious speaking panel for established Blowing Agents & Foaming Processes Conference
- SMITHERS RAPRA ADDS THREE NEW SPEAKERS TO REACH CONFERENCE IN HOUSTON
- The Polymer Library — Leading Source of Information on Polymers and Plastics — Now Available on EBSCOhost®
- Smithers Rapra Releases Guide for the Determination of the Chemical Composition of Polymers
- Smithers Rapra celebrate its second successful Nanopolymers Conference in Frankfurt
- Smithers Rapra hosts U.S. REACH Conference to coincide with end of pre-registration
- Smithers Rapra offers the opportunity to present at the next Silicone Elastomers Conference
- Smithers Rapra Calls for Speakers for its second Leachables & Extractables Conference
- New book from Smithers Rapra examines Chromogenic Polymers
- BIOCOMP Bulletin and Library prove popular!
- Smithers Rapra offers the opportunity to present at the eleventh Blowing Agents and Foaming Processes Conference
- Smithers Rapra announces programme for Polymer Electronics Conference
- Smithers Rapra Launches Separate Publishing Company
- New book from Smithers Rapra examines Chromogenic Polymers
^ Back to Top
Job Vacancies
^ Back to Top
Other Pages
^ Back to Top
